PET Star - High Pressure Compressor

PET Star - High Pressure Compressor

PET Star - High Pressure Compressor

PET Star products are designed for the Plastic Blow Molding Industry. Quality with Reliability. Continuous Duty, Three Stage, Double Acting, Water Cooled Design. 100% Oil-free air. Constructed to ASME, and NEC requirements.


Quality with Reliability :

Continuous Duty, Three Stage, Double Acting, Water Cooled Design.
100% Oil-free air.
Constructed to ASME, and NEC requirements.
Advanced composite ring materials.
Stainless steel plate valves.
Self adjusting V-Belt tensioning system.
Stainless steel air piping with.
SAO O-ring fittings.


Minimize Customer Cost :

High efficiency full-load operation.
Low unloaded power due to capacity control system.
EPACT efficient motor standard.
Intellisys™ microprocessor control panel monitors and records pressure and temperatures, operating hours, and percent loaded.
Concrete filled subbase to minimize foundation required.
Forklift access and lifting eyes, for ease of installation.


Standard Options :

Filters
Receivers
Star-Delta starting
Weather proof motors
Dual water filters,with differential pressure indication
Heaters for frame and cylinders


Other Applications :

Air Separation.
Air Brake Testing.
Soot Blowing.
Metal Forming.
Down Hole Air Drilling.
High Pressure Instrument Air.
Autoclaving Process.
Engine Starting.
High Pressure Industrial Air.


Designed for the Plastic Blow Molding Industry
Frame and Air End

Full floating sleeve-type main bearings
Hardened steel piston rods
Balanced running gear
Watercooled cylinder and packing jackets
Three stages of compression
State-of-the-art self-lubricating composite material for cylinder and piston rod packing rings


Lubrication System :

Pressure lubricated bearings
Crankshaft driven oil pump
Oversized oil sump
10 micron oil filter, spin-on type
Oil level indicator
Internal pressure relief valve Air System


Air System :

Intercoolers mounted utilizing ASME construction, 15oF (9oC) CTD
Aftercooler mounted utilizing ASME construction, 15oF (9oC) CTD
High ambient temperature (115oF/46oC) design Cont

Control & Electrical System :

Two-step capacity control
Full-voltage, non-combination type motor starter, mounted and wired in control panel
NEMA 4 (IP-54) electrical enclosures and wiring

Drive :

V-Belt drive complete with OSHA belt guard
Self-adjusting belt tensioning system
Electric motor, ODP, 1.15 service factor
230V-460V/3/60 or 380V-415V/3/50


Packaged- Design :

Low profile package
Single point connections for:
inlet cooling water
discharge cooling water
electrical power


Thermostatic water control valves, and solenoid operated shut-off valve
Low point drain and high point vent for cooling water system
Low point drain and high point vent for cooling water system


Unit Size Flow (M3/hr) 40/45 Bar\ (q) Motor Power (kW) Flow (ACFM) 580/650 psiq Motor Power (HP) Total Water Flow (qpm)
PET STAR - 170 170 30 100 40 21
PET STAR - 210 216 37 127 50 25
PET STAR - 260 245 45 144 60 28
PET STAR - 310 287 55 169 75 33